RÖHM web2product

RÖHM starts into Industry 4.0 - start with us!

As a pioneer in Industry 4.0, RÖHM initiates the product configurator web2product. You can now configure online your individual clamping jaws and start the production.

web2product is an amazing opportunity to extend an standard product for you special needs.

Your individual produced clamping jaws are ready for dispatch within 5 working days. 

Advantages for you!

  • Real time 3D visualisation of every configuration step
  • You get a price for your configuration immediately, no additional time for providing an offer.
  • Buy the configurated clamping jaws at the end of your configuration
  • The clamping jaws will be dispatched within 5 working days after your order
  • You can download 3D-models of the configurated clamping jaws in different formats e. g. STEP, STL,...

RÖHM web2product Video


Clamping jaws overview

The following types of clamping jaws are available and can be modified in length, height and width

Soft top jaw, tongue and groove

(Type AB002E)

 

Drawing type AB002E german / english

 

Technical configuration information:

a) The tongue and groove serration defines the position of the clamping jaws in addiction of the used chuck type. Because of that start with the choice of your chuck type. Please consider the configuration parameter “Index adjustment” and “Base jaw direction” to set your clamping diameter at the correct position on the clamping jaw.

b) If your used chuck isn’t obvious in the configurator you can also configure your clamping jaw individual. Please consider the showed interface specifications of the tongue and groove serration.  Attention: The position of the clamping jaw is addicted to the used chuck type and could be departing from the showed 3D visualisation.

 

 

Soft top jaw, serration 1/16"x90°

(Type AB54328E)

 

Drawing type AB54328E german / english

 

Technical configuration information:

The configuration is independent of the used chuck type. Please choose the parameter “Groove width (D)”, “Mounting hole distance (K)” and “Mounting thread” to make the jaw suitable to your used chuck type.

 

 

Soft top jaw, serration 1,5x60°

(Type AB54332E)

 

Drawing type AB54332E german / english

 

Technical configuration information:

The configuration is independent of the used chuck type. Please choose the parameter “Groove width (D)”, “Mounting hole distance (K)” and “Mounting thread” to make the jaw suitable to your used chuck type.

 

 

Optional modification

 

Drillings:

You can choose your jaws without drilling, with two drillings or with three drillings. That helps you to adopt the jaw perfectly to your existing groove stone.

Jaw design:

You can adapt the jaw to your work piece here.

No clamping
Clamping diameter
Clamping step

Chamfers:

To clamp little work pieces you can chamfer the edges. 

Weight reduction:

You can select following options to reduce centrifugal forces or interfering contour: 

No - no reduction
Chamfer
Shoulder

Serration shoulder:

If your lathe chuck have interfering contours to position the jaw in the middle, you can configure emancipation here.

Marking:

Option to add marking on your clamping jaw. (max. 20 characters)

Contact

Gregor Haug
Sales 

jawfinder@remove-this.roehm.biz
Tel: +49 7325/16-298